The XtraHand (Including 3 x Pro Hose Adapters)


You will receive one XtraHand vacuum extraction tool with a standard 32mm – 35mm connection port, you will also receive three of our Professional flexible Tapered Hose Adapters, all packed in our custom box.


A revolutionary new tool for Hands Free & Mess Free Drilling:

I would like to introduce you to a ground breaking new hands free extraction tool specifically designed to allow both professional trades people and DIY enthusiasts a safer and more effective way to remove the dust and debris of all types of materials from all types of drilling.

Unlike other existing versions that all have their own limitations and restrictions,

The XtraHand doesn’t, it effectively works with:

  • Spade Bits
  • Bullet bits
  • High Speed Steel bits
  • Tile drills
  • Masonry bits
  • Hole saws and even Auger Bits

In fact it’s the only tool that works with them all..!

The XtraHand is manufactured from a durable ABS plastic that contains approximately 15% recycled plastic.

The extraction port at the mouth of the tool is nearly 70mm wide, allowing various drill bits and hole saws of up to 60mm to be used effectively.

The internal section of the extraction port is greater than 2 square cm’s which is why it removes larger materials like Wood and Composite board with ease.

The soft playable rubber seal on the base of the tool is manufactured from a soft flexible silicone type rubber, this allows the tool to stick efficiently to many surfaces, leaving your hands free to control the drill.

The amount of suction produced by the tool will always be dependant upon the power of the vacuum it is attached to.

The tool has a 32mm - 35mm hose connector, this is a standard size, however, not all vacuums are standard, which is why we include a custom Hose adapter made by ourselves.

There are two main reasons our Pro hose Adapter is different from standard Hose adapters on the market.

Firstly, is the material, most of the adapters that are currently available are made from a rigid ABS plastic, which means they have no real flexibility and can be difficult or near impossible to connect to some extraction ports and hoses.

Unlike these standard hose adapters, our custom made adapter has been manufactured from a flexible 2 part polymer, this allows it to expand and contract under tension and gives it a far better friction fit.

Secondly, standard hose adapters are manufactured with square edged stepped sections, whereas the Pro Hose Adapter by DrillBuddy has been manufactured with tapered leading edges to each of the external stepped sections, this helps provide an almost effortless and frustration free compression fitting to slightly oversized or undersized ports and hoses.

This makes the Pro Hose Adapter extremely versatile, and increases its functionality.

Write a review